 |
 |
 |
|
 |
|
|
|
  |
|
"GURUNANAK" KNIFE GRINDING MACHINE
SALIENT FEATURES :
Machine bed
Welded, modular construction principle.
Guideways
Hardened and ground steel bands for main and side guides, easily exchangeable.Machine table
Fixed for flat grinding with total table coverage, in Electro - magnetic design or as cast iron table with 'T' slots & clamps.
Electro - magnetic swivelling table for flat, bevel and multi surface grinding, in one setting up operation, swivelling 360 degrees, multiple bearing points with large diameter journals for maximum rigidity. Additional clamping sides with 'T' slots & clamps.
Swivelling table in cast iron for mechanical clamping.
Mechanically table locking, by hand.
Grinding Head Carriage
Heavy casting mounting on four reels with eight New - departure dust proof ball bearings which act as rollers. Four reels guide the carriage in the carriage ways of the bed. The sliding base, mounted on top of the carriage, is adjustable to feed the grinding segmental or cup-wheel to the knife can be ground either straight or concave as paper knives require only 5 degrees swivel of motor base.
Down-feed for Grinding Tool
Multiple spindle system for play and weight equalisation.
Grinding motor
SIEMENS or NGEF Brand.
Grinding Head
Cylindrical type bonded to flange for light grinders, segmental heads for heavy grinding machines.
For quick re-setting or changing of the segments, an easily accessible changing station is situated at the rear of the machine.
To ensure vibration-free running, all grinding wheel flanges and segmental heads are fitted with adjustable balancing weights. For obtaining maximum segment use, patented segment savers can be used.
Cooling System
Water tank attached with the machine. Cooloing fluid application by the electro-coolant pump.
Electrical Unit
All electrical controls are housed in the master panel board.
TECHNICAL DETAILS :
|
Model
|
Clearance
|
Grinding width
|
Width of table
Cast Iron |
Grinding Motors
( K.W. ) |
|
GNP-60
|
125 mm
|
150 mm
|
200 mm
|
3.7 Kw
0.8 Kw |
|
GNP-72
|
125 mm
|
150 mm
|
200 mm
|
3.7 Kw
0.8 Kw |
|
GNP-84
|
150 mm
|
150 mm
|
200 mm
|
5.6 Kw
0.8 Kw |
|
GNP-110
|
150 mm
|
200 mm
|
200 mm
|
5.6 Kw
0.8 Kw |
|
GNP-120
|
150 mm
|
255 mm
|
200 mm
|
7.5 Kw
1.5 Kw |
Illustrations are not binding, as we are constantly changing design and specification for improving the machine. All sizes and weights are approximate.
© Copyright gurunanakmachines.com. All rights reserved